-40%
Non-Contact Level Controller Liquid Level Sensor Waterproof Water Level Detector
$ 15.94
- Description
- Size Guide
Description
Product DescriptionNon-Contact level controller Liquid Level Sensor Waterproof Water Level Detector
Description:
The high and low level controller can be used in conjunction with the non-contact liquid level sensor, and can also be used with other liquid level sensors, such as float ball.
When the liquid level is too low, the liquid level sensor sends out the low level alarm signal, and the pump starts automatically and adds liquid level. On the contrary, the pump stops automatically when the liquid level is too high. In this way, the function of automatic control of liquid level of container is realized.
Feature:
1>. Strong compatibility, can be used in conjunction with a variety of liquid level sensor
2>. Strong protection, with waterproof pump idling protection and water level overflow detection output, with 4 hours overtime pumping alarm
3>. Relay dry node output, can be applied to a variety of load control
4>. Control of diversification, manual or automatic mode control of water pump
5>. The installation is simple and convenient, the screw can be positioned and installed, and the electric box track can also be installed
Parameter:
NO.
Parameter
Value
1
Input voltage
AV100V-220V,50/60Hz
2
Operating voltage
DC12V
3
Operating current
Working current<=110mA, Static consumption current<=20mA
4
Load power
Less than 1.6KW(Overloading or three-phase pumps need to install AC contactor)
5
Alarm output
800W (Resistive load) frequent on or off output
6
Output mode
Relay frequent on or off or AC110//220V output
7
Output signal
Low induction signal input
8
High induction signal input
9
Pump idle detection signal input
10
Water overflow alarm signal input
11
Inductive head interface voltage
DC12V
12
Working temperature
-10 Celsius-75 Celsius
13
Size
115*90*40mm
Function:
1>. Water level automatic control: water level is lower than the low position induction probe, automatically start the pump, the water level rises to high level, and automatically closes the pump
2>. Idling delay pump: after starting, if the water supply pipe is detected without water, then delay 3-5 minutes to close the pump. During the pumping process, if the water flow stopped for more than 3 seconds, the pump was closed immediately
3>. Automatic tracking water source: after idling pump stop, start pumping once every two hours, until the water is full, pump stops
4>. Manual automatic switching: press K1 button to switch mode of work, red light to automatic mode, kill mode is manual mode
5>. Non contact inductive probe: durable probe, strong anti-interference ability, sensitive induction, no contact with liquid, corrosion resistance, safety, environmental protection and no pollution.
Package:
1x level controller
About Us
We are the trustworthy supplier. If you have any issues , please don't hesite to contact us via ebay message before opening any case or returns or leave any negative feedback .
Please believe in us . We must offer our best service to you at any situation .We also believe both of us could solve any problem friendly .Thanks in advance.
Payment
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 4 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping
1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.We arrange the shipment within our promised handling date.
3.Delivery time depends on destination and other factors.
4.International buyers please note:
a.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer's responsibility. We will try our best to reduce the risk of the custom duties.
b.Please check with your country's customs office to determine what these additional costs will be prior to buying.
Returns
Please contact us by ebay message before you want to return the item .We must help you out in the first time.
Contact Us
If you have any problem or puzzle , please feel free to contact us via ebay message at will , we must help you out in the first time .
powered by