Minitor III/IV (3/4) PROGRAMMING cradle with USB interface

Description

NOTE:  Windows 10 users ONLY- PLEASE read the entire listing before ordering. If you run Windows 10 and don't know how to install a USB driver, please do not purchase. Sorry, but my profit margin is too thin on these to warrant providing an hour of free tech support.
This is a Minitor III/IV(i.e. 3/4) programmer intended to be used with Microsoft Windows PCs running XP through Windows 7.
The programming cradle will also work with Windows 8 and 10, BUT you will have to download the driver specified on the enclosed instruction sheet.
If you aren't comfortable doing that, please don't order this programmer from me or ANY one else.
The USB interface cable on my version lets you avoid having to find a serial port on a PC, which has become rare on newer PCs.
The programmer is powered by the USB interface, and the pager is powered by its own battery, so there is no need for a power transformer. I build these from
charging cradles. (Note that this is now
solely
a programmer, and cannot be used as a charger. It also cannot be used to change the
firmware
in a pager.)
The Minitor pagers are very sensitive receivers, and can be used for other purposes besides paging, assuming you can program it yourself and don't have to pay someone - every time you want it re-programmed.
This programming cradle works with the standard Motorola Minitor III/IV programming PC software. I am NOT providing this software, but you can find it online.
Note: the modified cradle is no longer a standard Motorola product. So, please don't go to Motorola with any problems, contact me instead.
I have a 100% positive eBay feedback, and intend to keep it. So, contact me if you have any problems. Also, if you have surplus and/or broken Minitor V chargers, I am interested in buying them, so list them.
ALSO: I have a similar programmer listed that will program Minitor V pagers.