-40%

MD-PS002 MPXV7002DP Transducer Pressure Sensor Differential Breakout Board

$ 0.71

Availability: 234 in stock
  • Item must be returned within: 60 Days
  • MPN: Does not apply
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Buyer
  • Condition: New
  • Refund will be given as: Money Back
  • Brand: Unbranded
  • UPC: Does not apply
  • EAN: Does not apply
  • Restocking Fee: No

    Description

    MPXV7002DP Sensor
    Specification:
    Differential Pressure Sensor board.
    The MPXV7002 series piezoresistive transducer in the small outline package (SOP) is a state-of-the-art monolithic silicon pressure sensor designed for a wide range of applications, but particularly those employing a microcontroller or microprocessor with A/D inputs. This patented, single element transducer combines advanced micromachining techniques, thin-film metallization, and bipolar processing to provide an accurate, high level analog output signal that is proportional to the applied pressure.
    The MPXV7002 is designed to measure positive and negative pressure. In addition, with an offset specifically at 2.5V instead of the conventional 0V, this new series allows to measure pressure up to 7kPa through each port for pressure sensing but also for vacuum sensing (refer to the transfer function in the data sheet for more detailed information).
    Features:
    - -2 to 2 kPa (-0.3 to 0.3 psi).
    - 0.5 to 4.5 V Output
    Weight: 0.1 oz; 4 g
    Please see it to know more:http://code.google.com/p/ardupilot-mega/wiki/Airspeed
    Packing Content:
    1PCS*Differential Pressure Sensor board.
    1PCS*Free cables.
    MD-PS002 Sensor
    Features:
    Economy, compact;
    The chip surface coating protection against water vapor, dust and other chip;
    Pressure connection stainless steel, pressure;
    Pin-defined, easy connection;
    A variety of range to choose from.
    Applications:
    The car: tire gauge, car air pump, MAP sensor, diagnostic equipment, steam engine and suspension control, automotive sensors.
    Industry: pressure switches and controls, air brake switch, cable leak detection, portable pressure gauge.
    Medical: patient monitoring and diagnostic equipment, blood pressure monitors.
    Research: aerodynamics miniature absolute pressure sensor.
    Range: 150kpa (absolute pressure) pressure range from vacuum (absolute 0 pressure) above atmospheric pressure 50kpa
    Remarks: 15psi are range. Vacuum (-100kPa), that can be measured can also be used to measure positive (positive and negative pressure detection) can also be used for the compositescale.
    Output: mV signal
    Electricity supply: 5VDC or constant current 1Ma of
    Linear accuracy: 0.25% FS
    Feature
    Solid, MEMS technology, high reliability
    Low cost, small size
    Standard pressure range :0-15 ,0-30 ,0-50 ,0-100Psia
    Nonlinear <0.20% FSO
    Piezoresistive sensing technology, the silicon / silicon-bonded chips, good stability
    Electrical performance (22 ° C)
    Environmental conditions
    Temperature Range
    Operating temperature -40 to 125 ° C
    Storage temperature -55 to 150 ° C
    Maximum overvoltage 6X
    Usually pressure 2X
    Compatible medium gas
    Technical indicators (1)
    Zero output ± 8 mV / v / ± 10 mV / v
    Full scale output 65-115 mV / 75-125 mV / 170-280 mV
    Linearity of ± 0.20% FSO / ± 0.25% FSO
    Hysteresis and repeatability of ± 0.10% FSO
    Zero temperature coefficient of ± 30 μv / v / ° C
    Resistance temperature coefficient of 0.30% / ° C
    Sensitivity temperature coefficient of -0.20% FSO / ° C
    Zero Thermal Hysteresis ± 0.10% FSO
    Long-term stability of ± 0.20% FSO
    Note:
    1, all test values relative 22 ° C, 1mA constant current power supply
    2,100 KPA pressure range
    3,4295 psi pressure range
    4, straight-line output
    5, in the 0-70 ° C, the temperature coefficient of typical values.
    Package Included:
    1 x Sensore pressione MD-PS002 vacuum sensor absolute pressure sensor
    Package includes:
    MD-PS002 MPXV7002DP Transducer Pressure Sensor Differential Breakout Board
    Payment
    Payment
    Payable To
    Note
    PayPal
    All payments are due within 7 days of the close of auction. Failing to do so, non-paying bidders will be reported to eBay.
    Shipping Policy
    Delivery Time
    We ship to worldwide, it usually takes 10-30 Business Days to delivery.
    Shipping address
    We ship to your PayPal address. Please, make sure to provide us with correct, precise, and detailed shipping Address.
    Send Time
    Items will be shipped within 1 to 3 business days upon payment received or cleared.
    Note
    If you don't receive items over 30 business days, please notify us via eBay message.
    Return Policy
    We appreciate your business and offer an instant 7 days return policy.(7 days after receive the item). The returned item has to be in its original condition. We are able to refund your money without shipping cost.
    Contact us
    For anything about product, price, shipping or order status, please contact us via eBay message.
    We love positive feedback and 5 scores DSR. We will leave it for everyone that leaves it for us.
    On Sep-21-18 at 06:48:53 PDT, seller added the following information: