KEYENCE Fiber Sensor Amplifier FS-N11N FSN11N Original New in Box Free Ship

Description

KEYENCE Fiber Sensor Amplifier FS-N11N FSN11N Original New in Box Free Ship
Specifications:
Model
FS-N11N
Type
Standard 1 output
Cable/M8 connector
Cable
Main unit/expansion unit
Main unit
Control output
1 output
Monitor output (1 to 5 V)
–
External input
Response time
50 μs (HIGH SPEED)/250 μs (FINE)/500 μs (TURBO)/1 ms (SUPER)/4 ms (ULTRA)/16 ms (MEGA)
Control output
NPN open collector 24 V; 1 output max: 100 mA or less; 2 output total:
100 mA or less (used stand-alone)/20 mA or less (multiple connections); residual voltage 1 V or less
Monitor output
–
External input
Multiple connections to expansion units
Up to 16 units can be connected total (two-output type is treated as two units)
Number of interference prevention units
0 for HIGH SPEED; 4 for FINE; 8 for TURBO/SUPER/ULTRA/MEGA
(When set to double, the number of interference-prevention units will be doubled.)
Rating
Power voltage
12 to 24 V DC ±10% ripple (P-P) 10% or less
Rating
Normal: 900 mW or less (36 mA max. at 24 V, 48 mA max. at 12 V)*1
Eco on mode: 800 mW or less (32 mA max. at 24 V, 39 mA max. at 12 V)*1
Eco Full mode: 470 mW or less (19 mA max. at 24 V, 23 mA max. at 12 V)
Environmental
resistance
Operating ambient
luminance
Incandescent lamp: 20,000 lx or less; Sunlight: 30,000 lx or less
Operating ambient
temperature
-20 to +55°C (-4 to +131°F) (no freezing)*2
Operating ambient
humidity
35 to 85% RH (no condensation)
Vibration resistance
10 to 55 Hz, double amplitude 1.5 mm 0.06", 2 hours for each of X,Y,Z axis
Shock resistance
500 m/s2 3 times for each of X,Y,Z axis
Case material
Both main unit and expansion unit housing material: Polycarbonate
Weight
Approx. 75 g
*1 Increases 100 mW (4.0 mA) for High Speed mode
*2 One or two more units connected: -20 to +55°C (-4 to +131°F); 3 to 10 more units connected: -20 to +50°C (-4 to +122°F); 11 to 16 more units connected: -20 to +45°C (-4 to +113°F). When using 2-outputs, one unit is counted as two units.
All temperature regulations are for when the unit is mounted on a DIN rail and installed on metal sheeting.