Fingerprint Scanner Optical USB Fingerprint Reader Module Scanner Access Control

Description

Note: There are basically two requirements for using the optical fingerprint sensor. First is you'll need to enroll fingerprints - that means assigning ID #'s to each print so you can query them later. Once you've enrolled all your prints, you can easily 'search' the sensor, asking it to identify which ID (if any) is currently being photographed. You can enroll by using the windows software (easiest and neat because it shows you the photograph of the print) or with the Arduino sketch (good for when you don't have a windows machine handy or for on-the-road enrolling) Connection pin #2 is IN from sensor (GREEN wire) pin #3 is OUT from arduino (WHITE wire) 5V connect sensor (Red wire) GND connect sensor (Black wire) Package included: 1 x Fingerprint Recognition Module
Store category
Sign Up Now !
You may also like
Fingerprint Scanner Optical USB Fingerprint Reader Module Scanner Access Control Locks
Product Description
FZ1035G Optical Fingerprint Reader Module Sensor Scanner for Arduino Mega2560 UNO R3 Green Light
Note: If the code does not work , please change the arduino IDE to 1.6.6
Features:
Make adding fingerprint detection and verification super simple.
Typically used in safes­-there's a high powered DSP chip that does the image rendering, calculation, feature-finding and searching.
Connect to any microcontroller or system with TTL serial, and send packets of data to take photos, detect prints, hash and search.
You can also enroll new fingers directly - up to 162 finger prints can be stored in the onboard FLASH memory.
There's a red LED in the lens that lights up during a photo so you know it is working.
Specifications:
Supply voltage: DC 3.8-7.0V
Operating  Current: <65mA
Peak  current: <95mA
Fingerprint  image time: <1.0 seconds
Window area:  14.5*19.4 mm
Signature  File: 256 bytes
Template  files: 512 bytes
Storage capacity: 1000
False Accept  Rate (FAR): <0.001% (security level 3)
False Reject  Rate (FRR): <1.0% (security level 3)
Search time:  <1.0 seconds (1: 500 average)
PC  interface: UART (TTL logic level)
Baud rate (UART): (9600*N)bps (N=1~12, N default 6, equal 57600bps)
Working  environment: Temperature: -20 °C to 50 °C
Relative  Humidity: 40% RH to 85% RH (non-condensing)
Storage  Environment: Temperature: -40 °C to 85 °C
Relative  humidity: <85% H (no condensation)
Lighting:  Long light/Flashing
Dimensions  (L* W* H): 56*20*20.5mm
Note:
There are basically two requirements for using the optical fingerprint sensor. First is  you'll need to enroll fingerprints - that means assigning ID #'s to each  print so you can query them later. Once you've enrolled all your prints, you can easily 'search' the sensor, asking it to identify which ID (if any) is currently being photographed.
You can enroll by using the windows software  (easiest and neat because it shows you the photograph of the print) or  with the Arduino sketch (good for when you don't have a windows machine  handy or for on-the-road enrolling)
Connection
pin #2 is IN from sensor (GREEN wire)
pin #3 is OUT from arduino  (WHITE wire)
5V connect  sensor (Red wire)
GND connect sensor (Black wire)
Package included
:
1 x Fingerprint Recognition Module
1 x 6pins Female cable
1 x 6pins Male cable
Payment
Shipping
Delivery time
Return Policy
Contact us
Payment
1.We accept Paypal payment only , you can use credit card through PayPal.
2.Please make payment asap,then we can arrange shipment for you asap.
Shipping
If total amount ≥ 7usd ,we provide a tracking number with
you.
Delivery time
Normally it arrive in 10-30 business days when your order amount is more than 7usd.
And 30-60 days when amount is less than 7usd.
Return Policy
1.All products are eligible for 30-days money back guarantee.
2.All returns should be guided by us, please contact us for detail before you return anything.
Contact us
We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Feedback