Banner Engineering Photoelectric Infrared Emitters QS186E 10-30VDC 0-20 Meters

Description

2179UC7D.16
New Banner Engineering Photoelectric Emitters, Opposed 10VDC - 30VDC Power, 0 - 20 Meter Range, Part Number QS186E.  Each bid quantity is for One (1) Emitter with Instructions and Mounting Hardware.  You may bid / buy any number, up to the total quantity available above.
These were purchased at an industrial liquidation last year, and they are brand new in the original factory boxes.  We have a substantial quantity available, and they are factory new in every way.  These run about a pop from the factory.  If you are a supplier of Banner sensors, there is a tremendous profit potential with these.
We Have Both Sensors and Emitters Available
According to the manufacturer
:
(Not all specs will apply to this model)
WORLD-BEAM QS18
Miniature self-contained photoelectric sensors in universal housing
-- Easily fits (or retrofits) almost any mounting situation
-- Exceptional optical performance, comparable to larger “MINI-style” or barrel sensors
-- 10 to 30V dc operation, with complementary (SPDT) NPN or PNP outputs, depending on model
-- Bright LED operating status indicators are visible from 360°
-- Rugged sealed housing, protected circuitry
-- Models available with or without 18 mm threaded “nose”
-- Less than 1 millisecond output response for excellent sensing repeatability
Specifications
Supply Voltage
10 to 30V dc (10% maximum ripple) at less than 25 mA, exclusive of load;
Protected against reverse polarity and transient voltages
Repeatability
Opposed Mode: 100 microseconds
FF Mode: 160 microseconds
All others: 150 microseconds
Adjustments
Glass Fiber Optic, Plastic Fiber Optic, Convergent, Diffuse, and Retroreflective mode models (only): Singleturn sensitivity (Gain) adjustment potentiometer
Indicators
2 LED indicators on sensor top:
Green ON steady: Power ON
Yellow ON steady: Light sensed
Green flashing: Output overloaded
Yellow flashing: Marginal excess gain (1 to 1.5x excess gain)
Prior to date code 0223, the output indicator was red.
Construction
ABS housing
3 mm mounting hardware included
Connections
2 m (6.5 ft) 4-wire PVC cable, 9 m (30 ft) 4-wire PVC cable, 4-pin Pico-style or Euro-style QD, 4-pin Picostyle or Euro-style 150 mm (6 in) pigtail QD, depending on model
Output Configuration
Solid-state complementary (SPDT): NPN or PNP (current sinking or sourcing), depending on model;
Rating: 100 mA maximum each output at 25‹C
Off-state Leakage Current (FF Mode): less than 200 ƒÊA @ 30V dc
Off-state Leakage Current (All others): less than 50 ƒÊA @ 30V dc
ON-state Saturation Voltage: less than 1V @ 10 mA; less than 1.5V @ 100 mA
Protected against false pulse on power-up and continuous overload or short circuit of outputs
Output Response
Opposed Mode: 750 microseconds ON; 375 microseconds OFF
FF Mode: 850 microseconds ON/OFF
All others: 600 microseconds ON/OFF
NOTE: 100 millisecond delay on power-up; outputs do not conduct during this time
Environmental
Rated IEC IP67; NEMA 6
Operating Conditions
Temperature: -20 to +70 ‹C (-4 to +158 ‹F)
Relative Humidity: 90% @ 50o C (non-condensing)
Certifications
UL, CE
The full Banner datasheet is located at:
http://info.bannerengineering.com/ xpedio/groups/public/documents/ literature/63908.pdf