5Pcs Load Cell Scale Weight Sensor HX711 AD Weighing Module 1/2/3/5/10/20kg

Description

Store category
Sign Up Now !
You may also like
5Pcs Load Cell Scale Weight Sensor HX711 AD Weighing Module 1kg 2kg 3kg 5kg10kg 20kg
Product Description
5Pcs Load Cell Scale Weight Sensor HX711 AD Weighing Module 1kg 2kg 3kg 5kg10kg 20kg
Red Module:
Chip: HX711
Onboard 2Pcs 47 uF bile capacitance
Reserved CPU welding position ，not include the CPU
Two kinds of pin
Operation supply voltage range: 2.6-5.5V
Typical current : 1.7 mA
Size: 29mm*17mm*4mm
Operation temperature range: -40 ~ +85℃
Two selectable differential input channels
On-chip active low noise PGA with selectable gain of 64 and 128
On-chip power supply regulator for load-cell and ADC analog power supply
On-chip oscillator requiring no external component with optional external crystal
On-chip power-on-reset
Simple digital control and serial interface: pin-driven controls, no programming needed
Simultaneous 50 and 60Hz supply rejection
Green Module:
Description:
This module uses 24 high precision A/D converter chip hx711. It is a specially designed for the high precision electronic scale design with two analog input channel the internal integration of 128 times the programmable gain amplifier. The input circuit can be configured to provide a bridge type pressure bridge (such as pressure weighing sensor mode)is of high precision low cost is an ideal sampling front-end module.
Features:
Two selectable differential input channels
On-chip active low noise PGA with selectable gain of 3264 and 128
On-chip power supply regulator for load-cell and ADC analog power supply
On-chip oscillator requiring no external component with optional external crystal
On-chip power-on-reset
Simple digital control and serial interface: pin-driven controls no programming needed
Simultaneous 50 and 60Hz supply rejection
Current consumption including on-chip analog power supply regulator: normal operation < 1.5mA power down < 1uA
Operation supply voltage range: 2.6 ~ 5.5V
Operating Temperature Range:-20 degree ~ +85 degree
Weight Sensor:
Four leads, easy to use,
5-10V drive voltage applied, the force is directly output as a voltage change signal.
Dimensions: 12.7mm * 12.7mm * 80mm
Sensor through the screw hole at one end fixed and the other end to keep floating state, applying gravity following the direction indicated by label
Particular attention must not directly push the white plastic cover part, so as not to damage the sensor
Payment
Shipping
Delivery time
Return Policy
Contact us
Payment
1.We accept Paypal payment only , you can use credit card through PayPal.
2.Please make payment asap,then we can arrange shipment for you asap.
Shipping
If total amount ≥ 7usd ,we provide a tracking number with
you.
Delivery time
Normally it arrive in 10-30 business days when your order amount is more than 7usd.
And 30-60 days when amount is less than 7usd.
Return Policy
1.All products are eligible for 30-days money back guarantee.
2.All returns should be guided by us, please contact us for detail before you return anything.
Contact us
We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Red Module: Chip: HX711 Onboard 2Pcs 47 uF bile capacitance Reserved CPU welding position ，not include the CPU Two kinds of pin Operation supply voltage range: 2.6-5.5V Typical current : 1.7 mA Size:29mm*17mm*4mm Operation temperature range: -40 ~ +85℃ Two selectable differential input channels On-chip active low noise PGA with selectable gain of 64 and 128 On-chip power supply regulator for load-cell and ADC analog power supply On-chip oscillator requiring no external component with optional external crystal On-chip power-on-reset Simple digital control and serial interface: pin-driven controls, no programming needed Simultaneous 50 and 60Hz supply rejection